Home Uncategorized Dripping faucet? know how to fix

Dripping faucet? know how to fix


Dripping faucet? know how to fix

A leaky faucet can be a major inconvenience to home residents; after all, no one deserves to be listening to that drip drip all day long, right?!

But in addition to that annoying noise, a leaking faucet can also be a huge waste of water and your money. Since a leaky faucet can waste approximately 50 liters of water a day — which corresponds to 1,400 liters a month.

People generally believe that a leaky faucet is a sign that it has been turned off badly. But, this is not always the case. Like any equipment, faucets tend to wear out over time, making some repairs necessary.

With that in mind, we’ve prepared this post to show you what the possible causes of this leak might be and how you can fix it. Check out!

Possible Causes of Leakage in Faucets:

First of all, it is necessary to emphasize that, currently, there are two distinct types of faucets: common and ¼-turn faucets.

If your faucet is the regular type, the problem is almost always with the rubber — also known as a seal — that is inside the faucet. To fix it, just change this rubber for a new one and make sure you install the part correctly. For plumbing Services Click here or For HVAC and Plumbing training Click here

¼ faucets, on the other hand, do not have this rubber, so to resolve the situation, in this case, it is necessary to change a part called “repair”.

How to fix leaks in common faucets?

Before carrying out repairs to any type of faucet, it is necessary to close the house’s water valve. This precaution is to avoid headaches with larger leaks.

In the case of common faucets, there are two ways to fix them: changing the entire repair or just the seal — in most cases, just changing the rubber is enough.

To access the seal, it is necessary to remove the tap valve. For this task, you will need a screwdriver to remove the screw. Some models of faucets have a threaded register and, in this case, just turn it all the way for the part to come loose. In case the register is stuck, you can count on the help of pliers. However, you must be very careful not to scratch it, so it is recommended to cover the piece with a cloth.

Some faucets have a protective cover, if this is the case, remove the cover to access the repair. Once this is done, identify the situation of the seal and check if it is really damaged or if it just left the place. In case of damage, replacement of the part will be necessary. But if that doesn’t solve the problem, the solution is to replace the entire repair.

How to conserve leaks in ¼ faucets?

As previously mentioned, ¼ taps do not have seals, so it is necessary to change the repair.

To do this, follow the instructions in the previous topic and disassemble the faucet until you find the repair. Once this is done, take the repair to a C&C unit and ask a seller for help in purchasing an identical part to make the exchange.

There is also the possibility that the repair is just dirty, which can damage the faucet’s seal. Therefore, check for any signs of dust or slime and, if there is, carry out cleaning.

Now that you know how to fix faucet leaks, visit our website and find the best solutions for you!