Home Technology Fix: Netgear WiFi Extender Amber LED Issue

Fix: Netgear WiFi Extender Amber LED Issue


Struggling with Netgear WiFi extender orange/ amber LED? Tried everything to fix the issue but nothing worked? Fret not! Just go through the steps given in this tutorial and find all possible fixes to get rid of the issue. Let’s take the plunge.

This tutorial provides you all the key solutions to fix various Netgear extender orange light issues such as:

  1. Internet LED continuously blinking orange on Netgear extender.
  2. Netgear WiFi extender orange LED.
  3. All the ports showing orange/ amber light.
  4. Orange light on the Ethernet port of Netgear extender.
  5. Blinking orange LED after Netgear extender firmware update.
  6. Netgear extender’s power LED lights amber.

Before delving into the troubleshooting fixes, let’s first determine why the Netgear WiFi extender is showing orange LED.

Why My Netgear Extender Shows Orange LED Light?

Obsolete Firmware on Netgear Extender

If you are avoiding the firmware update pop-ups, you may find yourself struggling with the Netgear extender orange light issue. So, access mywifiext web page, navigate to the Firmware Update section, and check for the available updates for your device. If the new firmware version is available, get it done by following the on-screen instructions.

Partial Netgear Extender Installation

Partial or improper Netgear extender setup may lead you to the orange or amber LED issue. In such a case, setting up Netgear extender in a proper way can help you out.

  1. To configure your extender using Android device or Windows computer, use mywifiext.net web address.
  2. To configure your Netgear extender using MAC computer or Apple device, use mywifiext.local web address.

Connectivity Issues

Did you connect your router to the Netgear extender? If so, check the wired connection between your router and the Netgear extender. The connection should be precise and finger-tight.

Solved: Netgear Extender Orange Light Issue

Let’s take the plunge and look at the steps highlighted below to fix the orange light issue on your Netgear extender:

Orange Internet LED on Netgear Extender

To troubleshoot the Netgear extender orange internet LED issue, walk through the instructions highlighted below:

  1. Power off your Netgear extender and router.
  2. Wait for some time.
  3. Afterward, turn on your router and then the Netgear extender.
  4. If after rebooting or power cycling, the internet LED is still amber on your Netgear extender, try making a WiFi connection between them.

Orange Ethernet LED on Netgear Extender

Follow the steps given below to fix the issue:

  1. Place your Netgear WiFi extender away from interference-creating obstructions like microwaves, baby monitors, refrigerators, Bluetooth speakers, cordless phones, kitchen appliances, etc.
  2. Update your Netgear extender firmware to the most recent version. This troubleshooting step also works when your Netgear Nighthawk not connecting to internet.

Netgear Extender Orange Light on Some Ports

If some of the Netgear extender ports are showing orange LED, here is the solution to fix the issue:

  1. Use a non-damaged Ethernet cable. If you find cuts or dust on the Ethernet cable, simply swap it with a new one.
  2. Make sure that your device includes 1 Gbps network interface card.
  3. Also, update the installed drivers on your device.

Netgear Extender Showing a Solid Amber Power Light

Get rid of the issue by following the instructions highlighted below:

  1. Verify whether the Netgear extender is receiving fluctuation-free power supply.
  2. Perform a factory reset on your Netgear extender and configure it again using or www.mywifiext.net.
  3. Place your Netgear extender near to your router and at the center location of your home.


That’s how you can fix the Netgear extender orange/ amber light issue within minutes. Just in case, the orange LED on Netgear extender is still troubling you, don’t hesitate to get in touch with our veteran experts via comments.