The router table is for many workshops a major investment on which the future of that business may depend. But what do you do when you are not good at machine tools and there are dozens of router table models on the market with very different specifications and prices? Relax, have a cup of coffee and read the details below.
If you already have a router for woodworking, you probably want to make the most of it. Although you can use the tool carried in wheeled tool bag with your hands free, for greater accuracy, you should consider a router table. You have an easier period, with complicated cuts.
What to look for in a router table?
In what industry do you work? Do you want to produce wood and wood parts? Most likely an accuracy of 0.1 mm will be sufficient. Do you want to make engravings or precision aluminum parts? Then you need high precision because some engravings can have an area of only a few mm². Do you want a car to use in the advertising industry or to make templates with? You will probably need a precise and fast router table.
Before buying a router table, you want to check some of its key components. The shape, size, material, fences and accessories differ from one table to another, and these things make the difference between a poor alternative and a cheap but good choice.
Flat, rigid: The top of your router’s table should be very flat and rigid. You don’t want a table that bends when you push material over it, which can damage the cut.
Flat metal payment: Almost every router table contains a motherboard to secure your router. The plate must be flat, very rigid and made of metal. The table should also contain a way to level the board relative to the rest of the top.
An easy-to-adjust fence: For many of your router cuts, you want a fence that guides the material along the router’s bit. The fence should be easy to adjust and tighten with two or four large buttons. The more beautiful tables include a two-piece fence that allows you to adjust the hole in the middle. You can also set up split fences to connect the wood.
Dust ports: The movement of wood creates a lot of sawdust, and if you do nothing about it, you will quickly have problems photographing the material along the table. Dust ports allow you to connect a store or other vacuum solution to vacuum the sawdust. Look for one on the fence and maybe a second under the router table.
Robust base: The last thing you want is for your table to move as you push the wood through the router bit. The change will lead to drift cutting and can destroy your part. A sturdy base should prevent movement.
Mitral groove: Like a miter table saw, the router board should have at least one groove in it, which runs parallel to the router and the fence. You can attach spring plates and wheels as needed for a secure cut. Some routers may have additional compartments for additional accessories.
Safety starts with prevention. Before you start working at the router’s table, make sure that you protect yourself from any possible danger. Safety glasses, gloves and a leather apron will protect you from the squeaks of the router’s table. For more information about the best router table, you can read the Ryobi router table review here.