Home Technology IP CCTV Camera Video Encoder And Decoder

IP CCTV Camera Video Encoder And Decoder

16
0
CCTV Camera
CCTV Camera

The revolutionary video encoders and decoders include industry-leading IP network camera control, multi-channel recording and the ability to connect multiple surveillance CCTV cameras to meet the highest security and surveillance requirements. 

Features include: integrated video motion and face detection, simple browser-based user interface, display mode configuration, setup and alarm functions as well as adaptive interlace-progressive conversion for excellent image quality even with moving objects. 

  • Up to 4 analog CCTV cameras can be connected 
  • Panasonic camera control 
  • Dual stream output in the formats H.264, MPEG-4 and JPEG with VGA or D1 image size with up to 30 frames / s 
  • Progressive edition 
  • Two-way audio (1 channel) 
  • Power over Ethernet (PoE) IEEE 802.3af 

Full frame rate with H.264 transmission on all four channels / multiple image streams H.264 (High Profile) and JPEG with VGA / D1 format 

Motion adaptive interlace-progressive conversion delivers sharp images even with moving objects 

Cable compensation for adaptation to long cable lengths / Open, changeable conversion table allows adaptation to different RS-485 control protocols 

Space for SD / SDHC card for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and as a backup in the case of network faults (JPEG) 

Camera title display: max. 16 alphanumeric characters in the picture / bidirectional audio transmission (full duplex) 

PoE support allows remote power supply via the network cable (according to IEEE802.3af) 

Small design, with optional mounting material, up to 3 devices can be mounted side by side in a standard rack 

Various alarm sources (3 switching inputs, VMD, camera alarm via coax, video loss, Panasonic alarm command) 

Motion detection (Video Motion Detection, VMD) in 4 programmable areas 

Face detection with the option of transmitting the coordinates via XML or in the video stream (only on channel 1) 

Motion Detection (VMD) metadata for VMD search in WJ-ND400 

Internet mode: H.264 / MPEG-4 image streams are transmitted using HTTP 

Multilingual user guidance for display and configuration: English, French, Italian, Spanish, German, Russian (must be installed by hand) 

IPv4 / IPv6 protocol support 

The coaxial LAN converter can be used for distances up to 300 m for PoE + connections, 500 m for PoE connections and 2.0 km for non-PoE + connections. (When used with the RG-6 / U coaxial cable, the loop resistance without additional parts is less than 4 Ω / 100 m.) 

Two models are available on the receiver side 

WJ-PR204 – 4-channel 

WJ-PR201 – 1-channel 

Camera site: 

WJ-PC200 

Up to four network CCTV cameras can be connected to one receiver unit (WJ-PR204) 

PoE + capable (Power Over Ethernet Plus) 

The coaxial LAN converter is compatible with PoE + (IEEE802.3at) and PoE + cameras can be connected and used * 1. 

Fast transfer 

The coaxial LAN converter achieves a transmission speed of at least 35 Mbps via TCP * 2 and at least 45 Mbps for UDP connections * 2. 

(When used with coaxial cable RG-6 / U and for distances of less than 2.0 km [PR201], 500 m [PR204] 

No setup required 

Connections can be established by connecting the coaxial cable to the coaxial LAN converter. 

* 1 There are restrictions on how the CCTV cameras can be combined when they are combined. The type of power supply and coverage to the side units of the receiver. 

A detailed instruction manual can be found on our website. 

* 2 The transmission speed is the speed of transmission between the side unit of the receiver and the side unit of the camera. 

The values ​​can vary depending on the condition of the coaxial cable (e.g., time-related wear of the cable), network conditions, etc. 

Coaxial LAN converter – Easy conversion from analog to IP-based technology with existing coaxial cable 

WJ-PR201 

Key Features 

Up to 4 network CCTV cameras 

Power over Ethernet Plus (PoE+) 

The coaxial LAN converter can be used for distances up to 300 m for PoE + connections, 500 m for PoE connections and 2.0 km for non-PoE + connections. (When used with the RG-6 / U coaxial cable, the loop resistance without additional parts is less than 4 Ω / 100 m.) 

Two models are available on the receiver side 

WJ-PR204 – 4-channel 

WJ-PR201 – 1-channel 

Camera site: 

WJ-PC200 

Up to four network CCTV cameras can be connected to one receiver unit (WJ-PR204) 

PoE + capable (Power Over Ethernet Plus) 

The coaxial LAN converter is compatible with PoE + (IEEE802.3at) and PoE + cameras can be connected and used * 1. 

Fast transfer 

The coaxial LAN converter achieves a transmission speed of at least 35 Mbps via TCP * 2 and at least 45 Mbps for UDP connections * 2. 

(When used with coaxial cable RG-6 / U and for distances of less than 2.0 km [PR201], 500 m [PR204] 

No setup required 

Connections can be established by connecting the coaxial cable to the coaxial LAN converter. 

* 1 There are restrictions on how the CCTV cameras can be combined when they are combined. The type of power supply and coverage to the side units of the receiver. 

A detailed instruction manual can be found on our website. 

2 The transmission speed is the speed of transmission between the side unit of the receiver and the side unit of the camera. 

The values ​​can vary depending on the condition of the coaxial cable (e.g. time-related wear of the cable), network conditions, etc. 

  • Full H.264 frame rate transmission 
  • Thanks to the adaptive interlace / progressive conversion scanning, blurring is minimized so that moving objects can also be reproduced clearly. 
  • The openly designed command conversion table for RS485 guarantees the operability of PTZ cameras from various manufacturers 
  • PoE (Power over Ethernet). Power supply via LAN cable 
  • Multilingual user interface and menu navigation 

The GXE100 network video encoder enables control and recording of an H.264 video channel and offers a simple browser-based user interface for camera control, display mode configuration, setup and alarm functions. 

The WJ-GXE100 offers full frame rate transmission (up to 30 fps) with a resolution of 640 x 480 pixels. Excellent image sharpness is ensured through the use of adaptive interlace / progressive conversion scanning, which can also display moving objects clearly. The advanced compensation system enables sharp images with long cable runs. 

The integrated video motion detector has four programmable detection areas and transmits data via XML or video stream.

LEAVE A REPLY

Please enter your comment!
Please enter your name here